Steni Facade Panels | Buildright

© 2026 Buildright

docker

Steni Facade Panels Image

Steni Facade Panels

Installation Guide Steni Color | Steni Vision | Steni Nature

Steni

59 articles in this module

1.
Receive and handle the panels
(4 articles)

1.1.

Control the delivery

1.2.

Strap panels during transport

1.3.

Store panels protected on a flat surface

1.4.

Lift panels straight and carry on their side

2.
Prepare for installation
(7 articles)

2.1.

Important information

2.2.

Work safely and remove dust when cutting and drilling

2.3.

Cut panels on construction site

2.4.

2.5.

Repair with edgepaint pen

2.6.

Drill holes in panels

2.7.

Make control measurements of walls and panels

3.
Prepare and install with wooden battens
(4 articles)

3.1.

Preconditions for installation with wooden battens

3.2.

Installation in areas prone to punding rain

3.3.

Air gap > 15 mm at foundation, windows, doors, and cornices

3.4.

Install battens with correct dimension and distance

4.
Prepare and install with metal battens
(4 articles)

4.1.

Preconditions for installation with metal battens

4.2.

Installation in areas prone to punding rain

4.3.

Air gap > 15 mm at foundation, windows, doors, and cornices

4.4.

Install battens with correct dimension and distance

5.
Install panels: Flat installation using screw fasteners (FS100)
(5 articles)

5.1.

Ensure correct joints and placement of screws

5.2.

Fasten the panels in the correct sequence: Start on the second-to-top row

5.3.

Use correct screws and torque

5.4.

Use Steni spacer to ensure minimum gap

5.5.

Install panel with right direction

6.
Install panels: Flat installation using pop-rivets (FS100)
(5 articles)

6.1.

Vertical installation: Ensure correct joints and placement of pop-rivets

6.2.

Horizontal installation: Ensure correct joints and placement of pop-rivets

6.3.

Fasten at Fixed Points

6.4.

Pre-drill for rivets

6.5.

Fasten panels in the right sequence

7.
Install panels: Bevel siding (FS200)
(5 articles)

7.1.

Ensure appropriate batten installation

7.2.

Start with narrow strip of panel at the base

7.3.

Install 196 mm panels

7.4.

Install 200 - 395 mm panels

7.5.

Install outside corner and window reveal

8.
Install Steni Colour and Steni vision panels: Flat using adhesives (FS400)
(6 articles)

8.1.

Install correct battens

8.2.

Ensure correct working conditions

8.3.

Clean panel surface and prime batten

8.4.

Install double-sided foam tape

8.5.

Apply Elastic adhesive

8.6.

Install the panel

9.
Install joint and corner profiles
(2 articles)

9.1.

Install joint profiles

9.2.

Install corner profiles

10.
Install corner and u-elements
(2 articles)

10.1.

Install corner element

10.2.

Install U elements

11.
Maintain Steni panels
(6 articles)

11.1.

Immediately after installation

11.2.

Maintain and clean regularly

11.3.

Use correct cleaning agent

11.4.

High pressure washing

11.5.

Remove Paint, Grafitti, Varnish, Stain etc.

11.6.

Other pollutants and desinfection

12.
Perform detailed engineering with Steni® facade panels
(7 articles)

12.1.

Design in accordance with applicable regulations

12.2.

Windloads - fixing points for horizontal installation

12.3.

Windloads - fixing points for vertical installation

12.4.

Direction of panels for Steni Colour

12.5.

Fire classification

12.6.

Ventilated cladding - air gap requirements

12.7.

Use screws without sealing washers

13.
Documentation (Technical, Approvals, HSE and Maintenance)
(2 articles)

13.1.

Technical documentation and HSE

13.2.

Management, operation and maintenance

Language: